AC Schnitzer Art.nr 5111410310
AC Schnitzer Front splitter for BMW X2 U10 with M Sport package
★★★★★ 5.0 · 110+ fornøyde kunderFrakt inkludert, ingen skjulte kostnader
Del opp fra 38 kr/mnd · eller betal om 30 dager
Kun 0 igjen på lager
Trygg betaling · Kjøp nå, betal senere med Klarna · 30 dagers åpent kjøp
Personlig rådgivning
Snakk med en Kong-spesialist
Usikker på passform eller hvilket oppsett som passer bilen din? Snakk med oss før du bestiller. Send gjerne reg.nr eller VIN.
Produktinfo
Philosophy
Free from the compromises of series production, AC Schnitzer develops custom components to the highest standard of perfection.
“Form follows function“ - This guiding principle is systematically applied by the engineers and designers of the aerodynamic components for BMW vehicles.
AC Schnitzer aerodynamic components pick up and subtly emphasise the styling lines of the base vehicle, while giving the body striking new contours.
At the same time however, they have a real effect: They increase downforce on the front and/or rear axles, to ensure better ground adhesion.
Only high quality composite materials are used in production of our AC Schnitzer aerodynamic components. Because only these materials meet our high quality standard.
Material: Polyurethane (PUR for short or also known as PU)
Thanks to its outstanding mechanical properties, PUR (polyurethane) is ideal for use in areas exposed to high wear, e.g. in quality vehicle construction. PUR is easily formable, very form-stable and very light in comparison with other plastics. It also paints extremely well (even repeatedly, where required).
Polyurethane is produced by a chemical reaction that takes place immediately before the material is processed. Polyol and isocyanate react to form polyurethane in a mixing head.
PUR obtains its positive product properties through processing with the "R-RIM technology" (Reinforced Reaction Injection Molding). In this technique, the highly reactive PUR components are filled with short fibers, mixed at high pressure and processed in reaction injection molding.
As a rule, the reaction mixture from the mixing head and sprue is filled into a closed aluminum or epoxy resin mold in which it hardens to form the molded part. The R-RIM technology achieves particularly stable parts, high tensile strength and impact strength, and all this at low weight.
The resulting aerodynamic components are deburred, ground and - as a special service provided by AC Schnitzer to simplify handling for the customer – primed.
Once primed, AC Schnitzer aerodynamic components can be painted to the customer's preferences in any conceivable colour by a local paintshop of the customer's choice.
Creative Design
PUR, ASA or Carbon: at AC Schnitzer, all draft designs originate from a true Italian artist: Michele Viandante, who has been Head Designer here for many years. Naturally his designs are not only beautiful but must prove their suitability: for example, many parts are function-tested in the wind tunnel.
Testing
If the calculations match the results, further tests follow. For example, crash tests using dummies confirm that pedestrian protection requirements are fulfilled. Only when all tests have been passed and the homologation certificate has been issued are AC Schnitzer aerodynamic components released for sale worldwide.
Homologation Certificate
The parts homologation certificate is an official document which allows the use of tuning parts in public road traffic within the framework of the (StVZO) German road traffic licensing regulations (and some other countries). After installation or conversion of the part described in the certificate, the vehicle must be presented to an official inspection body. The inspector determines the correct installation and the authenticity of the part and subsequently enters the modification in the vehicle documents. The official operating license of the vehicle thus remains in force. The parts homologation certificate is part of the scope of delivery.
Uniqueness of the front spoiler
- Made in Germany
- made of high quality ASA
- weight optimised
- easy painting and mounting
- long lasting
- developed exclusively for BMW X2 U10
- 2 years warranty
Scope of delivery
- frontsplitter not painted
- vitro sticker with AC Schnitzer logo
- mounting package
- mounting instructions incl. painting instructions
- homologation certificate
Fits
- BMW X2 U10 (since 2024): - for BMW X2 U10; - for vehicles with M Sport package; - not for M35i xDrive
Ofte stilte spørsmål
Passer delen til min bil?
Se «Passer» øverst og produktinfoen. Er du usikker, send oss reg.nr eller VIN på SMS til 482 55 829, så bekrefter vi før du bestiller.
Hvor lang er leveringstiden?
Varer merket «På lager» sendes innen 24 timer. Varer fra fjernlager har estimert levering 3–5 uker. Frakt er alltid inkludert i prisen.
Kan dere montere for meg?
Vi har ikke eget verksted, men vi setter deg i kontakt med montører vi samarbeider med rundt om i Norge. Ta kontakt, så hjelper vi deg.
Kan jeg dele opp betalingen?
Ja. Velg Klarna i kassen, så kan du betale om 30 dager eller dele opp betalingen.
Kan jeg angre kjøpet?
Du har 30 dagers åpent kjøp. Ta kontakt med oss, så hjelper vi deg med retur.
Er kjøpet med i Black Month-trekningen?
Ja, alle kjøp i november er med i trekningen av et SixNine-felgsett eller 20 000 kr. Én ordre gir ett lodd, og vinneren trekkes 1. desember.
Andre så også på