1 / 5

AC Schnitzer Art.nr 5111601310

AC Schnitzer Front splitter for MINI J01 with Sport Trim

5.0 · 110+ fornøyde kunder
€913,95

Frakt inkludert, ingen skjulte kostnader

Klarna Del opp fra 25 kr/mnd · eller betal om 30 dager
Velg Klarna i kassen. Betal om 30 dager uten ekstra kostnad, eller del opp betalingen i månedlige beløp. Kredittvurdering og vilkår gjelder fra Klarna.
Fjernlager · estimert levering 3–5 uker

Trygg betaling · Kjøp nå, betal senere med Klarna · 30 dagers åpent kjøp

Personlig rådgivning

Snakk med en Kong-spesialist

Usikker på passform eller hvilket oppsett som passer bilen din? Snakk med oss før du bestiller. Send gjerne reg.nr eller VIN.

Produktinfo

Philosophy

Free from the compromises of series production, AC Schnitzer develops custom components to the highest standard of perfection.

“Form follows function“ - This guiding principle is systematically applied by the engineers and designers of the aerodynamic components for BMW vehicles.

AC Schnitzer aerodynamic components pick up and subtly emphasise the styling lines of the base vehicle, while giving the body striking new contours.

At the same time however, they have a real effect: They increase downforce on the front and/or rear axles, to ensure better ground adhesion.

Only high quality composite materials are used in production of our AC Schnitzer aerodynamic components. Because only these materials meet our high quality standard.

Material: Polyurethane (PUR for short or also known as PU)

Thanks to its outstanding mechanical properties, PUR (polyurethane) is ideal for use in areas exposed to high wear, e.g. in quality vehicle construction. PUR is easily formable, very form-stable and very light in comparison with other plastics. It also paints extremely well (even repeatedly, where required).

Polyurethane is produced by a chemical reaction that takes place immediately before the material is processed. Polyol and isocyanate react to form polyurethane in a mixing head.

PUR obtains its positive product properties through processing with the "R-RIM technology" (Reinforced Reaction Injection Molding). In this technique, the highly reactive PUR components are filled with short fibers, mixed at high pressure and processed in reaction injection molding.

As a rule, the reaction mixture from the mixing head and sprue is filled into a closed aluminum or epoxy resin mold in which it hardens to form the molded part. The R-RIM technology achieves particularly stable parts, high tensile strength and impact strength, and all this at low weight.

The resulting aerodynamic components are deburred, ground and - as a special service provided by AC Schnitzer to simplify handling for the customer – primed.

Once primed, AC Schnitzer aerodynamic components can be painted to the customer's preferences in any conceivable colour by a local paintshop of the customer's choice.

Creative Design

PUR, ASA or Carbon: at AC Schnitzer, all draft designs originate from a true Italian artist: Michele Viandante, who has been Head Designer here for many years. Naturally his designs are not only beautiful but must prove their suitability: for example, many parts are function-tested in the wind tunnel.

Testing

If the calculations match the results, further tests follow. For example, crash tests using dummies confirm that pedestrian protection requirements are fulfilled. Only when all tests have been passed and the homologation certificate has been issued are AC Schnitzer aerodynamic components released for sale worldwide.

Homologation Certificate

The parts homologation certificate is an official document which allows the use of tuning parts in public road traffic within the framework of the (StVZO) German road traffic licensing regulations (and some other countries). After installation or conversion of the part described in the certificate, the vehicle must be presented to an official inspection body. The inspector determines the correct installation and the authenticity of the part and subsequently enters the modification in the vehicle documents. The official operating license of the vehicle thus remains in force. The parts homologation certificate is part of the scope of delivery.

Uniqueness of the front spoiler

  • Made in Germany
  • made of high quality ASA
  • weight optimised
  • easy painting and mounting
  • long lasting
  • developed exclusively for MINI J01 SPORT
  • 2 years warranty

Scope of delivery

  • frontsplitter not painted
  • vitro sticker with AC Schnitzer logo
  • vehicle specific mounting package
  • mounting instructions incl. painting instructions
  • homologation certificate

Fits

  • MINI J01 Cooper E/SE/JCW (since 2023): - for MINI F66; - for vehicles with John Cooper Works trim or SPORT Trim
Ofte stilte spørsmål

Passer delen til min bil?

Se «Passer» øverst og produktinfoen. Er du usikker, send oss reg.nr eller VIN på SMS til 482 55 829, så bekrefter vi før du bestiller.

Hvor lang er leveringstiden?

Varer merket «På lager» sendes innen 24 timer. Varer fra fjernlager har estimert levering 3–5 uker. Frakt er alltid inkludert i prisen.

Kan dere montere for meg?

Vi har ikke eget verksted, men vi setter deg i kontakt med montører vi samarbeider med rundt om i Norge. Ta kontakt, så hjelper vi deg.

Kan jeg dele opp betalingen?

Ja. Velg Klarna i kassen, så kan du betale om 30 dager eller dele opp betalingen.

Kan jeg angre kjøpet?

Du har 30 dagers åpent kjøp. Ta kontakt med oss, så hjelper vi deg med retur.

Er kjøpet med i Black Month-trekningen?

Ja, alle kjøp i november er med i trekningen av et SixNine-felgsett eller 20 000 kr. Én ordre gir ett lodd, og vinneren trekkes 1. desember.

Frakt inkludertIngen skjulte kostnader. Varer på lager sendes innen 24 timer.
30 dagers åpent kjøpTrygg handel med personlig oppfølging.
Hjelp med monteringVi setter deg i kontakt med montører vi samarbeider med.
Entusiaster som svarerRing eller SMS 482 55 829.
€913,95Frakt inkludert